Connecting standard MIDI out DIN connector
to the “gameport” of sound card.
If your schematic comes out illegible you can find the full size (or download) here.
To come back to this page click on "Back" button in your browser.
Notes:
1. Optocoupler is 6N137 type or equivalent.
2. Used resistors has tolerance 5% (or better).
3. "A" inverter may be realized by suitable IC (e.g. 74HC04) or transistor.
4. Pin No. 2 of MIDI IN connector can't be connected to ground of Soundcard.
NC = not connected
© 1998-2025 AkordeonCentrum.cz